Load HTML file into VBA Microsoft Access Email
To concatenate strings on multiple lines you must have a space between the '&' and '_' as they are separate operators. strBody = "<html><p> some of my html text here" & _ 'Note the spaces "more formatted html text here" & _ "even more formatted html text here" & _...
Is it possible to make a fluid two-column layout in Outlook 2007+ emails
Not sure if this would work but newer things like phones should be browser compatible whereas outlook isn't so you could use media queries to change you tables into block elements for smaller screens (allowing for stacking) and this should be ignored by outlook so you should still have the...
VBA code for new mail alert in Outlook
A VBA macro sub should look like the following one: Public Sub Test(mail as MailItem) ' here you can do whatever you need End Sub You need to check out the SenderEmailAddress property of the incoming email. It returns a string that represents the e-mail address of the sender of...
Paste pivot table as bitmap into Body of Outlook Appointment
excel-vba,bitmap,outlook,paste,appointment
There is no HTML support in appointment items and hence no no Oapt.HTMLbody Unfornunately the SendMessage API also doesn't work. So I finally (unwillingly) tested with SendKeys and it works. Note: I am not using .Save as this code is only for testing. To save the appointment, re add the...
How to copy text and charts in an Excel sheet to Outlook body?
Perhaps something like this: Sub createJpg(Namesheet As String, nameRange As String, nameFile As String) ThisWorkbook.Activate Worksheets(Namesheet).Activate Set Plage = ThisWorkbook.Worksheets(Namesheet).Range(nameRange) Plage.CopyPicture With ThisWorkbook.Worksheets(Namesheet).ChartObjects.Add(Plage.Left, Plage.Top, Plage.Width, Plage.Height) .Activate .Chart.Paste .Chart.Export Environ$("temp") & "\" & nameFile & ".jpg", "JPG" End With Worksheets(Namesheet).ChartObjects(Worksheets(Namesheet).ChartObjects.Count).Delete...
Deploy Outlook add-in to Office Store
outlook,add-in,outlook-addin,office365
The manifest '.xml' file is the xml file that you need to upload (you are right, it isn't a package - that wording is for SharePoint apps and is confusing). Make sure that you are using the manifest that has the full URL references and not the localhost references that...
Outlook API Limitations
You can develop an Outlook add-in or just automate Outlook from an external application to get the job done. The Outlook 2013 developer reference section in MSDN describes all the necessary information for developers. See Walkthrough: Creating Your First Application-Level Add-in for Outlook to get started with an add-in. And...
Outlook Addin, When Loading Error Ribbon_GetDCVisible
Answer was to rebuild and check startup code. My problem was a duplicate key in dict during startup.
How to add a new tab in Outlook. Outlook addin/plugin development using Visual Studio 2013
Command Bars were deprecated with Outlook 2010 and not used any longer. You need to use the Ribbon UI (aka Fluent UI) to customize the ribbon in Outlook. VSTO provides two ways for creating a custom ribbon UI: Walkthrough: Creating a Custom Tab by Using the Ribbon Designer Walkthrough: Creating...
Outlook AddIn Zoom.Percentage
c#,vba,outlook,zoom,outlook-addin
Thanks to Eugene Astafiev for his help. The square brackets did the trick VBA Private Sub objInspector_Activate() Handles objInspector.Activate Dim wdDoc As Microsoft.Office.Interop.Word.Document = objInspector.WordEditor wdDoc.Windows(1).Panes(1).View.Zoom.Percentage = 150 End Sub C# private void Inspector_Activate() { Document wdDoc = objInspector.WordEditor; wdDoc.Windows[1].Panes[1].View.Zoom.Percentage = 150; } ...
Get result of ShowCategoriesDialog in Outlook
No, it is not. The Outlook object model doesn't provide anything for that.
How to create a top-level folder in my Outlook using vb.net - VB.NET, Outlook 2013
Top folders (root nodes in the navigation pane) are store. If you need to add a new store in the profile you can use the AddStoreEx method of the Namesapace class which adds a Personal Folders file (.pst) in the specified format to the current profile. See How to: Add...
Save emails daily incorporating if filename are duplicates
To save with Date Time Seconds & Subject you could do sName = Format(dtDate, "MM-DD-YYYY", vbUseSystemDayOfWeek, _ vbUseSystem) & Format(dtDate, "-hhnnss", _ vbUseSystemDayOfWeek, vbUseSystem) & "-" & sName & ".msg" ...
Inserting Link inside Mailto body
html,model-view-controller,outlook,mailto
You can't have spaces in URLs so you must encode the space in the filename in order to create a URL to the file. mailto: URLs are URLs so an encoded space will be converted back to a regular space when it is parsed. When inserting one URL into an...
Create Outlook message with Signture in Visual Basic
Call Display first - that is when the signature is added to the body. You will the need to merge the HTMLBody property with the signature with your own text. Keep in mind that you cannot simply concatenate 2 HTML strings. ...
Access VBA To Send Query Results to Outlook Email in Table Format
You're changing the HTMLBody every loop rather than adding to it. You should set your header row above the loop, then set each row inside the loop. I like to fill up arrays and use the Join function - it's more visually pleasing to me. Public Sub NewEmail() Dim olApp...
Outlook VBA - set sentonbehalf and Refresh ActiveInspector
To make the From label show the right value, you need to set the PR_SENT_REPRESENTING_EMAIL_ADDRESS property (DASL name http://schemas.microsoft.com/mapi/proptag/0x0065001F) using MailItem.PropertyAccessor.SetProperty. UPDATE: As a test, you can try to run the following script from OutlookSpy - create a new message in Outlook, click "Script" button on the OutlookSpy Ribbon in...
Change ActiveX email font
email,outlook,activex,activexobject
The Outlook object model provides three main ways for working item bodies: Body - a string representing the clear-text body of the Outlook item. HTMLBody - a string representing the HTML body of the specified item. Word editor - the Microsoft Word Document Object Model of the message being displayed....
Unable to open mailItem because of outlook interface..!
c#,outlook,office-interop,office-2013
Try to use the following code instead: oApp = Activator.CreateInstance(Type.GetTypeFromProgID("Outlook.Application")) as Microsoft.Office.Interop.Outlook.Application; It looks like something is wrong with the windows registry records. Take a look at the similar forum thread - Error: Unable to cast COM object of type 'Microsoft.Office.Interop.Outlook.ApplicationClass' to interface type 'Microsoft.Office.Interop.Outlook._Application'.. Do you have the Click2Run...
Email attachments recorded in Excel
excel,email,excel-vba,outlook,email-attachments
After many attempts to implement this scenario, I was unsuccessful. So I figured to put an alternative method after this macro. This macro is just a minor part of a much larger scale macro, but basically when there was blanks left in Column B I would replace a "YES" with...
Is it possible to reload outlook Office.ComAddIn list?
c#,outlook,outlook-addin,outlook-2010
The Update method of the COMAddins collection is used to refresh the list of COM add-ins from the Windows registry. But why do you need to create a new Outlook application instance in the code? Do you develop an Outlook add-in? If so, you can use the Application property of...
Create Outlook meeting on SharePoint page
sharepoint,sharepoint-2010,outlook,interop,meeting-request
The Considerations for server-side Automation of Office article states the following: Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office may exhibit unstable behavior and/or deadlock when Office...
how to add new account in outlook with Name Space C#2003
The Outlook object model doesn't provide any method or property for creating new accounts. You can add a new store, not an account. See the AddStoreEx method of the Namespace class which adds a Personal Folders file (.pst) in the specified format to the current profile. To create a new...
Opening Outlook address book from Excel
excel,vba,excel-vba,outlook,excel-2010
I wrote the solution just below my question.
Add image in email not as linked resource but should be visible in outlook
Encode the image using base64 and add like this: <img src="data:image/JPEG;base64,{encoded string}"> Where the {encoded string} part is a base64 encoding of image data. JPEG can be gif or whatever according to type of image....
How to read html body of attachment that is mail message in C#?
You can Save the attachment first as an MSG file (Attachment.SaveAsFile), then open the MSG file using Namespace.OpenSharedItem. If you using Redemption is an option, it allows to access embedded message attachment directly using RDOAttachment.EmbeddedMsg property. ...
Microsoft Interop OutLook C#- Cannot save attachments of type OLE
c#,outlook,interop,office-interop,com-interop
You would need to call IAttach::OpenProperty(PR_ATTACH_DATA_OBJ, IID_IStorage, ...) then open a particular stream from IStorage that contains the data that you are after. Note that the stream and its format are specific to the application that created the OLE attachment. Redemption supports Word Pad, Paint Brush, Excel, Power Point, Word,...
Outlook 2013 VSTO: Determine which calendar an AppointmentItem is on?
The key is to get a Folder object from Explorer.CurrentFolder via Application.ActiveExplorer. Shared folders will have the Folder.EntryID value duplicated in Folder.FolderPath, while non-shared folders will have an actual folder path value. You can also use NameSpace.GetSharedDefault if you want to get a proper reference to a shared folder....
VBA outlook application.wait not working
You can create a Sub that will mimic the Application.Wait, something like. Public Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long) 'For 64-Bit 'Declare PtrSafe Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long) Public Sub Pause(intSeconds As Variant) ' Comments: Waits for a specified number of seconds ' Params...
Generate and send iCal event to outlook
I found the error change the line string eventCode = serializer.SerializeToString(calendarEvent); to string eventCode = serializer.SerializeToString(iCal); and it works!
How to add a ribbon group to both Outlook inspector windows and the inline response contextual menu?
c#,outlook,vsto,outlook-addin,ribbonx
No, you need to define tabs separately. But there is no need to return the whole custom UI XML at once. Actually you need to return an appropriate ribbon XML markup depending on the value passed to the GetCustomUI method of the IRibbonExtensibility interface. The RibbonID string parameter indicates the...
How to be sure Outlook application has been loaded completely (application.StartUp event)
To make sure Outlook is fully initialized, call Namespace.Logon. If Outlook is already running, the call will do nothing. There is also no reason to call GetActiveObject - Outlook is a singleton, so creating a new object will return the existing object if Outlook is already running. olApp = new...
Changing the category tag of an email according to data in excel
excel,vba,email,excel-vba,outlook
Is this what you are trying? (Untested) Dim mail As Outlook.MailItem Dim fld As Outlook.MAPIFolder Dim ws As Worksheet Set ws = Sheets("Mail Report") Set fld = GetObject("", "Outlook.Application") _ .GetNamespace("MAPI").Session.PickFolder If fld Is Nothing Then MsgBox "No Inbox selected" Exit Sub End If '~~> Find last row in Col...
ThisOutlookSession code Working in one account but not working in another Account when copying the code. VBA Outlook 2007
Got it fixed! I tried to generate a new OTM file at the second user but I kept getting the error that outlook was still open/OTM was still in use. So I opened up Task Manager and ended Outlook. Suddenly, the quit event seems to work.. ...
MAPI Outlook History/Change Log
No, there is no such thing. There are some "original" properties stored on the appointment, but nothing like what you want. Take a look at an appointment with OutlookSpy (click IMessage button).
FileDescriptora Missing Characters
c#,winforms,com,outlook,clipboard
In the comments on the codeproject page another person mentions the same problem - in that case the offset of an array item was computed from the start of the structure, not taking into account the first 32/64 bits that contain the number of items in the array: [StructLayout(LayoutKind.Sequential, CharSet...
Sending email in HTML [duplicate]
You need to also set a header indicating this is HTML, e.g. // Always set content-type when sending HTML email $headers = "MIME-Version: 1.0" . "\r\n"; $headers .= "Content-type:text/html;charset=UTF-8" . "\r\n"; // More headers $headers .= 'From: <[email protected]>' . "\r\n"; $headers .= 'Cc: [email protected]' . "\r\n"; mail($to, $subject, $message, $headers);...
How to copy a file from a selected message to an outgoing message in outlook through applescript?
Dylan It appears that just passing the attachment between messages doesn't work but saving the attachment first and then passing the file name to the file property for the new attachment does. tell application "Microsoft Outlook" local mynames, msg1, msg2, saveToFolder, saveAsName set msg1 to last item of incoming messages...
VSTO Outlook Addin Ribbon Group Not Showing on Ribbon
The greyed buttons mean that your custom UI is disabled. Most probably you got an error in the markup or your code fires exceptions. Office applications disable add-ins that behave unexpectedly. I have got a bunch of questions to the initial post, so decided to publish them as an answer...
Need to extract attachments from Outlook (.msg) attachment via Lotus Notes
outlook,lotus-notes,attachment,lotusscript
Save the attachment using Attachment.SaveAsFile, then open the MSG file using Namespace.OpenSharedItem.
Save File Dialog in Outlook VSTO Addin
I don't think you absolutely need to use a save dialog via a form; In your ribbon code add this: On top using System.Windows.Forms; Then this function /// <summary> /// Return selected file from winform save dialog /// </summary> /// <param name="fn">The filename</param> /// <param name="id">The initial directory</param> /// <returns>Specified...
Formatting specific part of text string in VBA
excel,vba,excel-vba,outlook,format
HTML tags do work. I don't know why you say they don't. sBody = "All,<br /><br />Please Approve attached request for " & rType & ".<br /><br /><strong>Customer:</strong> " & customer & "<br />" then instead of the .Body property, use .HTMLBody .HTMLBody = sBody ...
setting event organizer with Outlook Calendar REST API
rest,outlook,organizer,outlook-restapi,outlook-calendar
This is the correct behavior. You cannot create an event on User A's calendar but set the organizer to User B.
“Best” way to get an Outlook MailItem from .msg file
The third way is to use run .msg file programmatically. A default application (outlook) should be opened in that case. For example: string file= @"C:\PWS\myMail.msg"; Process.Run(file); Be aware, you can't run multiple instance of Outlook. So, the message will be opened in the existing Outlook instance (if any). Both methods...
Drag and drop mail from Outlook to text
c#,email,drag-and-drop,outlook
You can use the Selection object when you drag and drop Outlook items to any forms. So, if the item is dropped there you can get it via the Selection object in Outlook. But when you Drga&Drop Outlook items on the desktop (to any folder on the disk) you get...
My outlook VBA code can't find a specific folder
vba,outlook,folder,outlook-vba
Figured it out thanks to the following link: Get MAPI Folder in Outlook from Folder Path. By right clicking on the folder I could see the actual location was on William and not directly on the folder. So the right code is: Set objFolder = objnSpace.folders("William").folders("#MemoScan")...
Email piping gmail and outlook replied mail
So based on the above scenario I prepared an utility class which helped to solved the issue <?php /** * Thic Utility class is used to piping the mail content. * * */ class EmailPiping { public $gmailRegex = '#\R+^on.*wrote:(.*)#msi'; public $outlookRegex = '#\R*From: (.*)#msi'; /** * This method is...
Outlook 2013 Cannot create ActiveX component from ASP.NET Application
asp.net,vb.net,outlook,office-interop
No Office app (including Outlook) can run in a service (such as IIS). Your options are Extended MAPI (C++ or Delphi only), Redemption (which wraps Extended MAPI and can be accessed from any language, including C#), EWS (Exchange only) or straight SMTP.
How to show the appointment page from a form region in outlook
Use the SetCurrentFormPage method of the Inspector class to display the specified form page or form region in the inspector. As a workaround you may try to call the Appointment button programmatically. Use the ExecuteMso method of the CommandBars class to execute the control identified by the idMso parameter. See...
Update event with outlook rest api fails with Method Not Allowed
c#,rest,outlook,outlook-restapi
I feel like a total fool... I was sending a POST when this request required a PATCH I just replaced HttpMethod.Post for new HttpMethod("PATCH") ...
Save only emails of today
Seems like you intended to use the Item.ReceivedTime to create your folder, but after you pull this value into dtDate, it never gets used. Perhaps try the following instead: strNewFolder = Format(dtDate, "mm-dd-yyyy") ^^ ...
Outlook mailItem fullscreen
c#,outlook,fullscreen,mailitem
You can set the WindowState property of the Inspector class to the olMaximized value. Use the GetInspector method of the MailItem class to get an instance of the Inspector class.
Dropzone.js - drop outlook emails
javascript,file,upload,outlook,dropzone.js
You cannot do that unless you override the IDropTarget interface of the browser. See Upload fails when user drags and drops attachement from email client
'The item is moved or Deleted' Outlook.mailItem
The mailItem.Sent property shows if the E-Mail has been sent. Additionally you can attach to the mailItem.Write event. (But take care - will also get called on just saving & so on) mailItem.Write += mailItem_Write; void mailItem_Write(ref bool Cancel) { //your code... } ...
Getting Outlook Window from VSTO Addin
The FindWindow method retrieves a handle to the top-level window whose class name and window name match the specified strings. The first parameter specifies the window class name. The second parameter is the window name (the window's title). If this parameter is NULL, all window names match. Instead of using...
Accessing shared outlook inbox in python
The GetSharedDefaultFolder method of the Namespace class returns a Folder object that represents the specified default folder for the specified user. Sub ResolveName() Dim myNamespace As Outlook.NameSpace Dim myRecipient As Outlook.Recipient Dim CalendarFolder As Outlook.Folder Set myNamespace = Application.GetNamespace("MAPI") Set myRecipient = myNamespace.CreateRecipient("Eugene Astafiev") myRecipient.Resolve If myRecipient.Resolved Then Call ShowCalendar(myNamespace,...
How to determine if the RecurrencePattern in Outlook is end by a date or end by recurrence count
OOM does not expose that property. You can parse the recurrence blob yourself (not for the fainthearted). If using Redemption is an option, use RDORecurrencePattern.PatternEndKind property (rekNoEndDate, rekEndAfterOccurrences, rekEndByDate). ...
How to capture “Print Tab” click event at the backstage in Outlook 2010 ?
outlook,outlook-addin,outlook-2010,office-addins
The command tag will not play any role in case of backstage UI controls. You can repurpose only controls on the ribbon (not backstage). See Temporarily Repurpose Commands on the Office Fluent Ribbon for more information. A possible solution would be to consider hiding the built-in UI and rebuilding it...
Get open outlook email as MailItem in Windows service
The fact is that Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office may exhibit unstable behavior and/or deadlock when Office is run in this environment. If you...
Redirect Hyperlinks to Local Browser in Azure RemoteApp
What you are looking for is called file-type associations which work both ways (e.g.: local PDF file opens in Azure RemoteApp or as in your case, Azure RemoteApp external URLs are opened in local browser). Currently, neither of these are supported for Azure RemoteApp, but you can vote here: http://feedback.azure.com/forums/247748-azure-remoteapp/suggestions/5960208-ability-to-create-file-type-associations...
Force Outlook to display from display name in header
This is just how Exchange works: all incoming sender and recipient names are resolved against GAL. Exchange uses the default display name and SMTP address.
Automatically export incoming emails from Outlook to existing Google spreadsheet [closed]
email,outlook,google-spreadsheet,export
Yes, it is. You can develop an Outlook add-in, see Walkthrough: Creating Your First Application-Level Add-in for Outlook to get started. The NewMailEx event is fired once for every received item that is processed by Microsoft Outlook. The item can be one of several different item types, for example, MailItem,...
Outlook: Move item from me to a folder
Right click on Email - Rules > Create Rule... Or go Advanced Options... and there is more Options Start with a blank rule, you can choose whether to apply the rule to incoming or outgoing messages After you select the conditions to identify the messages that you're looking for, you...
Send a text/plain email and prevent Outlook from collapsing lines
I finally found this question and answer, and my solution is: Prepend each newline with a tab character which might be "optimized away" by Outlook, e.g. because it is not followed by another newline. If it can be done without too much effort, of course it would help to generate...
Empty HTML mails in outlook.com, microsoft exchange & hotmail.com
html,css,wordpress,outlook,html-email
Well after some searching and reading @tvgemert's article link I was able to fix outlook. <!DOCTYPE html> <html> <head></head> <body> <table style="font-size: 15px; font-family: 'Open Sans', sans-serif; font-weight: 200;"> <img src="http://www.belife.nl/wp-content/uploads/2015/06/belife-RGB.jpg" align="top" style="display: block;"><br><h3 style="text-decoration: none; color: #434343;">Met deze brief verwijs ik onderstaande client naar u voor een programma medische...
Automatically insert email signature into Outlook Meeting Invite
vba,outlook,outlook-addin,outlook-vba
Outlook 2010 and newer include the form designer. File -> Options -> Customize Ribbon, then, in the Right Side pane, click to turn on the Developer Tab. From there you can design Meeting Request template to your specification. Then, to use it, you will select: New -> Meeting Request Using...
Responsive Email - Conditional Statements causing problems in Outlook
email,responsive-design,outlook,html-email
I believe I see the issue. The coditional code has align="center" in the table instead of align="left" and the two TDs at 300px when the table is only supposed to be 270px or 280px. This is adding an extra 30px and 20px of 'whitespace' around the tables. Change the size...
VBA Email with pasted chart and text in body
excel,vba,email,excel-vba,outlook
Change the selection start and end. Adding an extra line break might also be a good idea. You should also use MailItem.GetInspector instead of Application.ActiveInspector since the message is not yet displayed. Set OutApp = CreateObject("Outlook.Application") Set OutMail = OutApp.CreateItem(0) With OutMail .CC = "[email protected]" .BCC = "[email protected]" .Subject =...
VBA not Recognizing MAPI
excel,vba,excel-vba,outlook,outlook-vba
Namespace() will be valid in Outlook VBA since there is an intrinsic Application variable that points to the Outlook.Application object and the variable is global. i.e. all of its properties and methods are available without specifying "Application.*" In case of Excel VBA, Application points to an instance of the Excel.Application...
Exchange Error on Calendar item update :- At least one recipient isn't valid
c#,outlook,ews,exchangewebservices,extended-properties
Try using the overload version of Update that supports passing the SendInvitationsOrCancellationsMode enum, and pass SendInvitationsOrCancellationsMode.SendToNone. This will ensure that the server doesn't try to send meeting updates to attendees.
Process zip attachments outlook vba script
The Attachment class provides the Size property which returns a Long indicating the size (in bytes) of the attachment. To get the uncompressed size you need to save the attached file on the disk and then extract the content. The SaveAsFile method of the Attachment class saves the attachment to...
Is it possible to select a folder based on it's name rather then on it's path? VBA - Outlook
vba,outlook,folder,outlook-vba
The Namespace class provides the Stores property which returns a Stores collection object that represents all the Store objects in the current profile. The Store class provides the GetRootFolder method which returns a Folder object representing the root-level folder of the Store. You can use the GetRootFolder method to enumerate...
How to skip mail that has ANY category tag, but process mail that has no tag?
IsEmpty is used to determine if individual variable is initialized or not. You may want to see This Use this. This works for me. If Not mail.Categories = "" Then GoTo PASS_MAIL ...
Office 365 - multitenant application constantly gives unauthorized
In the ODataException, in the response, you can view the header values. There is an error there that explains my fault, it said something in the lines of : "Inconsistent resource". Which could be true. I found out that i didn't use https://outlook.office365.com/api/v1.0/ when requesting the token. But used it...
Outlook MailItem HTML Formatting Dropdown
A well-known fact is that Outlook uses Word for rendering HTML markup. You can read about supported and unsupported HTML elements, attributes, and cascading style sheets properties in the following series of articles in MSDN: Word 2007 HTML and CSS Rendering Capabilities in Outlook 2007 (Part 1 of 2) Word...
How to create an outlook extension using Visual Studio 2013?
VSTO (nor Outlook) doesn't provide such layout for custom forms. However, you are free to use Windows API functions to subclass the Outlook window and inject your own forms. They call them as Adjacent Windows In Outlook. See the Creating Adjacent Windows In Outlook sample code. Add-in Express uses the...
Outlook VBA Items.Count wierdness
Use the Sort method of the Items class to sort the collection of items by the specified property. Sort only affects the order of items in a collection. It does not affect the order of items in an explorer view. Sub SortByRecievedDate() Dim myNameSpace As Outlook.NameSpace Dim myFolder As Outlook.Folder...
Office 2010 monitoring calendar events
c#,vb.net,outlook,ms-office,office-interop
You need to convert to VB's event wireup format: AddHandler _explorer.BeforeFolderSwitch, AddressOf Explorer_BeforeFolderSwitch Note that the explicit delegate construction is unnecessary....
Find an email starting with specific subject using VBA
The first thing you should mind is that the Restrict() method does not evaluate the variable by it's name. You will have to concatenate the variable to the string. Another one is, if you look at the example from MSDN site, you will see that there is not support for...
Autohotkey: copy paste
email,outlook,autohotkey,copy-paste
(REFERRING TO YOUR INITIAL QUESTION) Note: You don't need to empty the clipboard before refilling it. Simply append the ; to each result and store it in a global variable. Once you want to release the variable's contents, press Win+V. all_mails := "Run, mailto: " #x:: ; store e-mail ;Copy...
Copying Outlook email body to .csv
vba,csv,outlook,outlook-vba,outlook-2010
Switch the Chr(58)) to varItem = Split(varText(i), Chr(9)) Look at VBA Chr...
C# Email - New lines not rendering with white-space: pre-wrap
c#,css,internet-explorer,outlook,html-email
New lines within html are not rendered as such. You need to add <br> tags at the end of each line to make sure that the email is rendered correctly with the new lines. You can do this within your c# code by replacing every new line character in your...
how does PHP know the real email of the host or server?
In your dns account you need to set your MX record pointing to your domain name. Regarding your second question. When an email is recieved, it might have a fake from address but the ip address of the server that sent the mail cannot be fake. There are many organisation...
Switching back to outlook appointment from a custom formregion
What form region type do you use? Is it an adjoining, replace or replace-all form region type? Make sure that a string value you pass to the method is the correct one. To be sure try to handle the PageChange event of the Inspector class which is fired when the...
How to call the quit/close event in outlook 2007 VBA
Set myOlApp = CreateObject("Outlook.application") There is no need to create a new Outlook instance. You should use the Application property availble in Outlook VBA. Private Sub Application_Quit() MsgBox "Goodbye, " & Application.GetNamespace("MAPI").CurrentUser End Sub Take a look at the Getting Started with VBA in Outlook 2010 article in MSDN....
Outlook reminder get AppointmentItem
Use the Reminder.Item property - it will return the corresponding AppointmentItem, TaskItem, MailItem, etc. You will need to check the actual type and/or cast it to the appropriate object.
OpenSharedItem locating recipient
Firstly, check if PR_RECEIVED_BY_ENTRYID property is present (you can do that in OutlookSpy - click OpenIMsgOnIStg). If it is present, read the PR_RECEIVED_BY_ENTRYID property (DASL name http://schemas.microsoft.com/mapi/proptag/0x003F0102) using PropertyAccessor.GetProperty, convert it to a hex string using PropertyAccessor.BinaryToString, then use it to call Namespace.GetAddressEntryFromID. You can then retrieve the current name...
If email subject line starts with certain values then do something
The correct syntax for your If statement is: If (mail.Subject Like "VEH*") Or (mail.Subject Like "MAT*") Then The brackets are optional (Like operator has higher precedence than Or), but it's easier to read. ...
How to show custom update/modifications text when I publish my outlook-addin. VB.NET
vb.net,visual-studio-2012,outlook,outlook-addin
ClickOnce doesn't provide anything for that. See Deploying an Office Solution by Using ClickOnce for more information. In the new version of the software which you are going to publish you may add a message box. It can be shown for the first run only. For example, add a windows...
Combining functions for auto attachment
What I actually would do instead is: Sub AddAttachment(Item As Outlook.MailItem) Dim myOlApp As Outlook.Application Dim myItem As Outlook.MailItem Dim myAttachments As Outlook.Attachments Set myOlApp = CreateObject("Outlook.Application") Set myItem = myOlApp.CreateItemFromTemplate("C:\Templates\test upload file.oft") Set myAttachments = myItem.Attachments myAttachments.Add "C:\TEST\" & Format(Date, "yymmdd") & "ABCDE.txt" myItem.Send End Sub Hope this helps...
Ask for credentials in email application [closed]
c#,visual-studio,email,outlook
You can ask through any dialog box you want to design, then you have to pass the parameters to Outlook through the NameSpace.LogOn method. By default you are opening the current users default profile. Here is a good tutorial (although it only shows logging onto the default profile without asking...
Outlook 2013 VSTO: How to get original MeetingItem for an Appointment?
Searching by the appointment id is the only way. There is no other way since there is no one-to-one correspondence between an appointment and (potentially) multiple meeting items in the Inbox and Sent Items folder. Also keep in mind that Outlook Object Model will not let you search for binary...